CBA Lighting & Controls

These glass lens domes are primarily used on legacy L860 and non-FAA series Low Intensity Runway & Taxiway Edge Lights (LIRL). They may also be found on some Low Intensity Helipad Lights. Base Diameter is 2-3/4 inches. Glass colors meet the FAA specifications in effect on the date of manufacture. Select the color or combination you need from the listing above. Made in USA.

Our 120V Low Intensity LED Runway & Taxiway Lights (LIRL) are assembled to order in our shop. These lights are intended for use on general aviation airstrips that do not exceed 3000 feet, heliports and helipads. They have a UV resistant yellow nylon 66 housing and a clear glass lens. A reflective band is used to indicate the light color(s) for easy identification. Lights are intended for smaller facilities and are supplied without a mounting riser to allow for various mounting preferences. If...

RISER TUBE, 6.0 INCHES NOMINAL LENGTH

LIGHTNING ARR/BLEEDER BOARD 120V TRIGGER / 240V LINE (REPL. GEA20049-4)

BLEEDER BOARD - 3 STEP FLASHER (REPL. GE3836-0018-1)

TRIGGER MODULE FOR H&P FLASHERS

HIRL HEAD SUBASSY QUARTZ 14'' (WAS L862-NQ14-PK)

HIRL HEAD SUBASSY QUARTZ 24'' (WAS L862-NQ24-PK)

HEATSHRINK KIT - ONE 16 INCH (APPROX) PIECE END ADHESIVE

HEATSHRINK KIT - ONE 16 INCH (APPROX) PIECE FULL ADHESIVE

This cordset is used in virtually all 6.6 amp runway and taxiway lights. Our kit contains a molded assembly with two single-conductor 16AWG leads molded into an FAA Certified Style 6 plug, plus terminals for to fit most incandescent and quartz light fixture sockets. The cordset is 30 inches long so it can be cut to length in the field before installing the correct terminals.

This cordset is used in virtually all 6.6 amp runway and taxiway lights. Our kit contains a molded assembly with two single-conductor 16AWG leads molded into an FAA Certified Style 6 plug, plus terminals for to fit most incandescent and quartz light fixture sockets. The cordset is 30 inches long so it can be cut to length in the field before installing the correct terminals. Pack of 12 cords with bulk packed terminals.

SOCKET, QUARTZ BI-PIN

SOCKET MED P.F. PHENOLIC

SOCKET MED. SCREW CERAMIC

MIRL 120V HEAD SUBASSY FOR ALL LIGHTS (WAS L861-NA24-PK)

MIRL QUARTZ HEAD SUBASSY 24 & 30 INCH LIGHTS (WAS L861-NQ24-PK)

MIRL INCAND HEAD SUBASSY 24 & 30 INCH LIGHTS (WAS L861-NT24-PK)

LAMP 48W 6.6A MR16, WITH (1) MALE AND (1) FEMALE CONNECTOR

RISER TUBE, 6.0 INCHES NOMINAL LENGTH

RISER TUBE, 16.0 INCHES NOMINAL LENGTH

RISER TUBE 22 INCHES NOMINAL LENGTH

TRANSFORMER SECONDARY LEAD REPAIR KIT

ADAPTER TO MOUNT AVLITE L810 LIGHT ON 1 INCH RIGID OR IMC CONDUIT